EOS 25M Control Panel to Relay Box Extension Cable RJ10/RJ14
- Free USA Shipping On Many Items
- Full Warranty
- Secure Checkout
- Authorized Dealer
Extend the Connection Between a Sauna Control Panel and Relay Box
The EOS 14-946285 is a 25-meter extension cable designed to connect a compatible sauna control panel to its relay box using RJ10/RJ14 connections.
This extended-length cable supports installations where the sauna control panel and relay box must be positioned farther apart than a standard cable allows. Verify the control system, connector type, required routing distance and EOS part number before ordering.
Long-Range Cable for Compatible EOS Control Installations
The EOS 14-946285 provides approximately 82 feet of cable length between a compatible sauna control panel and relay box. This can be useful when the relay equipment is installed in a remote service area or when the cable must follow a longer approved routing path.
This is a control-system cable only. It does not supply power to the sauna heater and does not replace the required heater power wiring, circuit protection or control equipment.
- Brand
- EOS
- Part number
- 14-946285
- Product type
- Sauna control extension cable
- Length
- 25 meters
- Approximate length
- 82 feet
- Connection path
- Control panel to relay box
- Connector type
- RJ10/RJ14
Purpose-Built for Extended Sauna Control Cable Routing
The EOS 14-946285 is identified by its 25-meter length, control-panel connection path and RJ10/RJ14 interface.
Extended Cable Length
Provides 25 meters of cable for installations requiring a longer distance between the control panel and relay box.
RJ10/RJ14 Connections
Uses the connector format specified for this EOS control extension cable.
Genuine EOS Component
Identified by EOS manufacturer part number 14-946285 for compatible control-system installations.
Confirm the Control System and Connection Type
The EOS 14-946285 is intended for compatible EOS sauna control installations requiring a 25-meter cable between the control panel and relay box with RJ10/RJ14 connections.
Listed Application
- Compatible EOS sauna control system
- Control panel to relay box connection
- RJ10/RJ14 connector requirement
- 25-meter cable length requirement
Verify Before Ordering
- Control panel model
- Relay box model
- Connector type at both ends
- Required finished cable length
- EOS part number 14-946285
Compatibility note: Bathing Brands does not identify specific control models on the supplier listing. Match part number 14-946285 to the current EOS installation manual, system parts list or installer-supplied specifications before purchasing.
Select the Cable by Function, Connector and Length
EOS control installations can use different cables for different connection paths. A cable intended for the control panel and relay box should not be assumed interchangeable with a sensor cable or another control accessory.
| Selection Detail | EOS 14-946285 |
|---|---|
| Connection path | Control panel to relay box |
| Cable length | 25 meters, approximately 82 feet |
| Connector format | RJ10/RJ14 |
| Correct use | Compatible EOS installation requiring part number 14-946285 |
| Not intended as | Heater power wiring, sensor cable or a universal networking cable |
A similar connector appearance does not establish compatibility. Confirm the EOS part number and approved system application.
EOS 14-946285 Specifications
| Manufacturer | EOS |
|---|---|
| Manufacturer part number | 14-946285 |
| Model number | 14-946285 |
| Product type | Sauna control extension cable |
| Cable length | 25 meters |
| Approximate imperial length | 82 feet |
| Connection path | Control panel to relay box |
| Connector type | RJ10/RJ14 |
| Quantity | One extension cable per quantity ordered |
| Return status | Nonreturnable replacement component. Verify compatibility before ordering. |
What Is Included?
Included
- One EOS 14-946285 25-meter control panel to relay box extension cable
Not Included
- Sauna control panel
- Relay box
- Temperature or safety sensor
- Sensor extension cable
- Sauna heater
- Heater power wiring
- Installation labor
Product images may show the cable coiled or displayed with connector details. This listing is for one extension cable only.
Plan the Cable Route Before Finishing the Sauna
The extension cable should be routed according to the current EOS control-system instructions. Plan the complete path between the control panel and relay box before closing walls, ceilings or service chases.
Confirm the Equipment
Verify the control panel, relay box and EOS part number before beginning installation.
Measure the Complete Route
Include bends, service loops, wall penetrations and the final equipment locations when determining whether 25 meters is sufficient.
Protect the Cable
Route the cable away from heater surfaces, sharp edges, moisture exposure and electrical conductors when required by EOS instructions and applicable codes.
Do not cut, splice, modify or substitute connectors unless expressly permitted by current EOS documentation. Unauthorized modification may affect communication, operation and safety.
This Extension Cable Is Nonreturnable
Final-sale replacement component: This product cannot be returned. Confirm the control system, connection path, RJ10/RJ14 connector requirement, 25-meter length and EOS part number 14-946285 before ordering.
Why Order EOS Control Accessories from My Luxury Home Spa?
Compatibility Assistance
Send us the control-panel model, relay-box model and required EOS part number when you need help comparing them with this listing.
Clear Product Information
Review the cable length, connection path, connector format and final-sale status before placing your order.
Secure Online Ordering
Purchase through My Luxury Home Spa using the secure payment options displayed during checkout.
EOS 14-946285 Extension Cable FAQ
What is the EOS 14-946285?
It is a 25-meter extension cable for connecting a compatible EOS sauna control panel to its relay box.
How long is the EOS 14-946285 cable?
The cable is 25 meters long, which is approximately 82 feet.
What type of connectors does the cable use?
The supplier identifies the connection format as RJ10/RJ14.
What equipment does this cable connect?
It is intended to connect a compatible sauna control panel to its relay box.
Is this a sauna sensor extension cable?
No. This product is identified for the connection between the control panel and relay box. It should not be substituted for a sensor cable.
Is this a universal RJ cable?
No universal compatibility should be assumed. Match EOS part number 14-946285 and the approved control-system application before ordering.
Can this cable be used for sauna heater power?
No. It is a control-system connection cable and does not replace the heater's required power wiring or electrical circuit.
Can the cable be cut or spliced?
Do not cut, splice or modify the cable unless current EOS documentation specifically permits it.
Can the EOS 14-946285 be returned?
No. Bathing Brands identifies this replacement component as nonreturnable. Verify compatibility and length before ordering.
Verify Your EOS Control System Before Ordering
Send us the control-panel model, relay-box model, required cable length and EOS part number. We will help you compare that information with this product listing.
Why Buy From Us
FAQs
Shipping & Delivery
Free shipping available on select orders. White-glove delivery and setup can be arranged at an additional cost in most areas. We'll confirm your preferred date after purchase.
Warranty
Full manufacturer warranty, registered at purchase. Need help with a claim? Our U.S. support team handles it directly with the brand.
Returns
New, uninstalled items can be returned within the brand's policy window. We'll help coordinate pickup and any restocking requirements.
Installation & Power
Most saunas/hot tubs require dedicated circuits. We provide spec sheets and can recommend licensed installers in your area.
