EOS 25m Sensor to Relay Box Extension Cable for Touch 3 and Emotec D
- Free USA Shipping On Many Items
- Full Warranty
- Secure Checkout
- Authorized Dealer
Extend the Sensor Connection to the EOS Relay Box
The EOS 14-20015310 is a 25-meter extension cable designed to connect the sensor to the relay box in compatible EOS Touch 3 and Emotec D sauna control installations.
This model-specific control accessory provides additional cable length when the planned sensor-to-relay-box route exceeds the reach of the standard connection cable.
25m EOS Sensor Extension Cable
EOS part 14-20015310 extends the connection between a compatible sauna sensor and relay box. Bathing Brands lists it for EOS Touch 3 and Emotec D sauna control systems.
This listing is for one extension cable only. The sauna sensor, relay box, control panel, heater and other system components are not included.
- Brand
- EOS
- Part number
- 14-20015310
- Product type
- Sauna sensor extension cable
- Cable length
- 25 meters
- Connection
- Sensor to relay box
- Listed controls
- Touch 3 and Emotec D
- Quantity
- One cable
- Return status
- Nonreturnable
Extended Sensor Placement for Compatible EOS Controls
The EOS 14-20015310 is designed for installations requiring a longer connection path between the sauna sensor and relay box.
25-Meter Length
Provides additional cable reach for installations where the sauna sensor and relay box must be positioned farther apart.
Sensor to Relay Box Connection
Designed specifically to extend the control-system connection from the compatible sauna sensor to the relay box.
Listed Control Compatibility
Bathing Brands lists the cable for compatible EOS Touch 3 and Emotec D sauna controls.
Listed for EOS Touch 3 and Emotec D Controls
EOS part 14-20015310 is identified as a 25-meter extension cable from the sauna sensor to the relay box for compatible Touch 3 and Emotec D control systems.
Published Application
- EOS Touch 3 sauna control
- EOS Emotec D sauna control
- Sensor-to-relay-box connection
- 25-meter cable length
Verify Before Ordering
- Exact control-system model
- Relay box model
- Sensor type and connection point
- Required EOS manufacturer part number
- Required cable length
Compatibility is model-specific: Confirm EOS part number 14-20015310 in the installation or parts documentation for the exact sauna control system. Do not choose a replacement cable based only on appearance or length.
Sauna Sensor to Relay Box Extension
This cable extends the communication connection between the compatible sauna sensor and relay box. It is not intended to replace the line-voltage wiring that supplies power to a sauna heater.
Designed to Connect
- A compatible EOS sauna sensor
- A compatible EOS relay box
- Touch 3 or Emotec D control-system components
Not Designed to Replace
- Sauna heater branch-circuit wiring
- Control panel to relay box cables
- Heater power-supply wiring
- Unrelated sensor cables
- Other EOS cables with different part numbers
Match the Complete Cable Specification
Verify the manufacturer part number, control system, connection points and cable length before purchasing this nonreturnable component.
| Selection Detail | Required Match |
|---|---|
| Manufacturer | EOS |
| Manufacturer part number | 14-20015310 |
| Connection points | Sensor to relay box |
| Cable length | 25 meters |
| Listed control systems | Touch 3 and Emotec D |
| System compatibility | Must be confirmed before ordering |
EOS 14-20015310 Specifications
| Manufacturer | EOS |
|---|---|
| Manufacturer part number | 14-20015310 |
| Model | 14-20015310 |
| Product type | Sauna sensor extension cable |
| Cable length | 25 meters |
| Connection application | Sensor to relay box |
| Listed control systems | EOS Touch 3 and EOS Emotec D |
| Quantity | One extension cable per quantity ordered |
| Connector type | Not published |
| Cable color | Not published |
| Return status | Nonreturnable replacement component. Verify compatibility before ordering. |
What Is Included?
Included
- One EOS 14-20015310 25m sensor-to-relay-box extension cable
Not Included
- EOS sauna sensor
- EOS relay box
- Touch 3 or Emotec D control panel
- Sauna heater
- Additional control cables
- Installation or electrical labor
Product imagery may show the cable coiled or arranged for identification. This listing includes one EOS 14-20015310 extension cable only.
Confirm the Correct EOS Sensor Cable
Complete these checks before purchasing this nonreturnable control component.
Identify the Control System
Confirm that the installed system uses an EOS Touch 3 or Emotec D control and record the relay box and sensor information.
Match Part 14-20015310
Verify that current EOS documentation identifies this part number for the sensor-to-relay-box connection.
Confirm the Cable Route
Measure the planned cable path and confirm that the 25-meter length is appropriate for the installation.
Follow the Applicable EOS Control-System Instructions
Cable installation and routing should follow the documentation for the exact Touch 3 or Emotec D control system. Disconnect the sauna system from electrical power before opening the relay box or accessing control-system connections.
- Confirm the cable and control-system part numbers
- Disconnect and secure all electrical power
- Inspect the cable and connectors before installation
- Follow the approved route between sensor and relay box
- Avoid crushing, pinching, tension and sharp bends
- Keep the cable away from prohibited high-temperature areas
- Observe required separation from line-voltage wiring
- Test sensor communication before completing the installation
Installation note: Sensor location, cable routing, permitted temperature zones and wiring separation must follow the instructions for the installed EOS control system.
This Extension Cable Is Nonreturnable
Final-sale replacement component: EOS 14-20015310 is nonreturnable. Confirm the control-system model, sensor-to-relay-box application, 25-meter length and manufacturer part number before ordering.
Why Order EOS Control Accessories from My Luxury Home Spa?
Compatibility Assistance
Send us the control, relay-box and sensor model information when you need help comparing it with this product listing.
Clear Product Information
Review the cable length, connection application, listed controls, package contents and final-sale status before ordering.
Secure Online Ordering
Purchase through My Luxury Home Spa using the secure payment options displayed during checkout.
EOS 14-20015310 Sensor Extension Cable FAQ
What is the EOS 14-20015310?
It is a 25-meter extension cable that connects a compatible sauna sensor to the relay box in EOS Touch 3 and Emotec D control installations.
How long is the EOS 14-20015310 cable?
Bathing Brands lists the cable length as 25 meters.
What components does this cable connect?
It extends the connection between a compatible sauna sensor and relay box.
Which EOS control systems are listed as compatible?
The cable is listed for compatible EOS Touch 3 and Emotec D sauna control systems.
Does this cable work with every EOS sauna control?
No. Compatibility should be confirmed using the documentation for the exact control, sensor and relay-box combination.
Is the sauna sensor included?
No. This listing includes one extension cable only. The sensor, relay box and control panel are not included.
What connector type does the cable use?
The connector type is not published on the Bathing Brands product page. Verify the part number and control-system documentation before ordering.
Who should install the EOS 14-20015310?
Installation should follow EOS instructions and be completed by a qualified installer familiar with the applicable sauna control system.
Can the EOS 14-20015310 be returned?
No. Bathing Brands identifies this replacement component as nonreturnable. Verify compatibility and cable length before ordering.
Verify Your EOS Control System Before Ordering
Send us the model information for your EOS control, relay box and sensor, along with the required cable part number. We will help you compare that information with this listing.
Why Buy From Us
FAQs
Shipping & Delivery
Free shipping available on select orders. White-glove delivery and setup can be arranged at an additional cost in most areas. We'll confirm your preferred date after purchase.
Warranty
Full manufacturer warranty, registered at purchase. Need help with a claim? Our U.S. support team handles it directly with the brand.
Returns
New, uninstalled items can be returned within the brand's policy window. We'll help coordinate pickup and any restocking requirements.
Installation & Power
Most saunas/hot tubs require dedicated circuits. We provide spec sheets and can recommend licensed installers in your area.
