Hot Cold Yoga Pilates Capsule
- Free USA Shipping On Many Items
- Full Warranty
- Secure Checkout
- Authorized Dealer
The Cryonick Wellness Technology Factory HotCRYO Chamber is a dual-mode wellness & recovery system designed to deliver alternating heat and cold exposure in a single enclosed chamber. Built for rehab centers, wellness studios, and luxury spa settings, HotCRYO supports structured contrast sessions with electric heating and air cooling—with no cryogenic gases. It’s engineered for repeatable protocols, operator-friendly controls, and a premium client experience.
What Is the HotCRYO Chamber?
HotCRYO is best described as a contrast-therapy chamber: a single unit that can run a warm phase followed by a cold phase (or alternate between the two) without moving the client between separate machines. This makes it easier for facilities to deliver a consistent, “appointment-style” session with clear start/stop steps, staff workflow, and reset procedures.
- Heat phase: A controlled warm-air cycle designed for comfort and relaxation.
- Cold phase: A controlled cold-air cycle (subzero capable, configuration dependent).
- Optional movement: Built-in light resistance ropes allow gentle movement during cycles.
Note: HotCRYO is intended for general wellness and recovery comfort. It is not a medical device.
How Sessions Typically Run in a Wellness Business
- Step 1 — Intake: Staff confirms eligibility, reviews safety rules, and selects a preset protocol.
- Step 2 — Setup: Client enters the chamber; operator confirms settings on the touchscreen.
- Step 3 — Contrast cycle: The unit runs heat → cold (or alternating intervals) based on the chosen preset.
- Step 4 — Optional movement: Client may use the light resistance ropes for gentle limb movement where appropriate.
- Step 5 — Reset: Staff wipes down touch points, checks filtration/air settings, and preps the unit for the next appointment.
Facility tip: Many owners standardize 2–4 protocols (Intro / Standard / Athletic / Relaxation) to streamline staff training and create consistent experiences.
Signature Features
- Dual Thermal Modes: Switch between warm-air and cold-air cycles within one chamber.
- Electric Heating & Air Cooling: No nitrogen or cryogenic supply required; powered by electrical systems.
- Fully Enclosed Design: Uniform exposure engineered for comfort and consistency.
- Touchscreen Control Panel: Preprogrammed sequences and manual adjustment for temperature and duration.
- Low-Impact Movement Integration: Resistance ropes support gentle activity during thermal cycles.
- LED Mood Lighting: Spa-friendly ambience; multi-spectrum options may be available by configuration.
- Air Filtration & Ionization: Supports air quality during both warm and cold phases.
Specifications
| Heating Mode (Typical) | Up to approx. 97.9°F (body-temperature range) (≈ 36.6°C) |
|---|---|
| Cooling Mode | Air cooling to subzero temperatures via compressor system (configuration & environment dependent) |
| Resistance Ropes | 4 low-impact ropes; approx. 3.3 lb resistance each (≈ 1.5 kg) |
| Cabin Dimensions (Approx.) | 118.7" L × 59.8" W × 70.9" H (≈ 9'11" × 5'0" × 5'11"; converted from 3016 × 1520 × 1800 mm) |
| Net Weight (Approx.) | 990 lb (≈ 450 kg) |
| Power Supply | 230V / 50Hz or 120V / 60Hz variant (site-dependent) |
| Power Consumption (Typical) | Approx. 2 kW (heating) to 3 kW (cooling) (varies by cycle settings) |
| Control Interface | 10.1" touchscreen display |
| Optional Features | Color therapy, ozone (O₃), air ionization, virtual trainer integration (availability varies) |
| Intended Use | Wellness, recovery, rehabilitation support (not a medical device) |
Need the exact electrical plan and installation drawing for your unit configuration? Contact us and we’ll provide the current documentation for your build.
What’s Included
- HotCRYO Chamber (base model with warm + cold modes)
- 10.1" touchscreen control interface
- Resistance rope kit (arms & legs)
- Operation & installation manual
- Standard manufacturer warranty documentation
- Crated freight delivery (scheduled appointment)
Warranty Coverage
- Standard Coverage – 1 Year (parts & electrical systems)
- Extended Options – Up to 2–3 years via service plans (availability varies)
Warranty terms may vary by configuration and delivery location; full certificate provided at purchase.
How HotCRYO Can Benefit Your Business
- One room, one appointment: Heat + cold cycles in a single unit can simplify your service menu and reduce client “handoffs” between machines.
- Premium, repeatable protocols: Presets support consistent sessions across staff members—ideal for memberships and packages.
- Studio differentiation: A standout recovery experience that can complement your brand as “high-end wellness.”
- Operational simplicity: Electric heating and air cooling—no cryogenic gas logistics.
- Upsell & bundling: Pairs naturally with infrared sauna, red light therapy, massage chairs, and recovery plans.
Want help positioning it? We can suggest compliant service names, package ideas, and an intake checklist for staff. Request a business setup consult.
Compare at a Glance
| Feature | HotCRYO Base | HotCRYO Premium / Grand |
|---|---|---|
| Heating Capacity | Standard heating control | Faster heating ramp / expanded performance range (configuration dependent) |
| Cooling Capacity | Standard air cooling cycle | Enhanced compressor / faster cooldown (configuration dependent) |
| Resistance Load | Approx. 3.3 lb rope resistance (≈ 1.5 kg) | Higher range or adjustable resistance (where offered) |
| Optional Add-Ons | Standard LED & ionization (where offered) | Color therapy, VR/virtual trainer, ozone, expanded ambience features (where offered) |
| SKU (Internal) | VAC-HOTCRYO-S | VAC-HOTCRYO-G |
*Actual thermal performance depends on ambient conditions, power supply, and session settings.
Site Prep & Installation
- Professional installation required: Installation must be completed by a Cryonick Wellness Technology Factory professional. Installation is billed separately—contact us for an installation quote.
- Electrical: Ensure a dedicated circuit suitable for heating and cooling loads. Confirm site voltage for your unit variant.
- Ventilation: Maintain ambient airflow to dissipate heat during cycles; keep any cabinet vents unobstructed.
- Access & clearance: Verify doorways, turns, and service access for delivery positioning and ongoing maintenance.
- Structural load: Floor must support approx. 990 lb equipment weight (plus crating during delivery).
- Room conditions: Avoid extreme humidity and condensation; follow manufacturer operating guidance for stable performance.
Estimated Running Costs
| Item | Typical Use | Notes |
|---|---|---|
| Electricity | Approx. 2–3 kW range (warm/cold phases) | Depends on cycle duration, ambient conditions, and settings |
| Maintenance | Low | Cleaning, filter checks, periodic servicing per schedule |
| Consumables | None (no cryogenic gas) | All-electric heating and air cooling system |
Shipping & Delivery
- Freight delivery (crated, curbside) with scheduled appointment
- Lead time: Varies by configuration—contact us for current build schedule
- Note: White Glove service is not available for this item class
Need to coordinate delivery windows or manage tight access? Contact us in advance.
FAQs
Is HotCRYO a medical device?
How do hot/cold cycles work?
What are the resistance ropes for?
Does it use nitrogen or cryogenic gas?
Who installs the HotCRYO Chamber?
Pro Tip: For businesses, start with two standardized protocols (Intro + Standard) and add advanced options only after staff is confident with workflow. Consistent presets simplify training and improve repeatability across clients.
Why Buy From Us
Shop trusted wellness brands with authorized dealer support and help choosing the right equipment.
Help understanding coverage and coordinating warranty inquiries. Coverage and registration requirements vary by brand and product.
Personal guidance from My Luxury Home Spa before, during, and after your purchase.
Ordering & Product Support FAQs
Shipping & Delivery
Free standard shipping is available on eligible products and destinations. Large equipment generally ships by freight with curbside delivery unless another service is expressly included.
White-glove placement, assembly, or other upgraded services may be available for select products and locations at an additional cost. Availability, scope, and pricing must be confirmed before booking. Processing, transit, and delivery scheduling vary by product and destination.
Review our Shipping Policy, or contact us before ordering if you need placement assistance or delivery by a particular date.
Warranty
Manufacturer warranty coverage varies by brand, model, component, and intended use. Review the product’s warranty documentation for coverage periods, exclusions, and any registration requirements. Commercial use may have different terms.
For warranty assistance, contact My Luxury Home Spa with your order number, model, serial number, and a description of the issue. We can help coordinate the next steps with the manufacturer or supplier.
Returns
Return eligibility, deadlines, fees, and shipping responsibilities vary by product. Some products have shorter return windows or specific restrictions. Eligible change-of-mind returns generally require unused equipment in its original packaging and written authorization before shipment.
Review our Return & Refund Policy and any product-specific terms before purchasing. Contact us promptly about damaged, defective, or incorrect items; these are reviewed separately from change-of-mind returns.
Installation & Power
Electrical, assembly, foundation, ventilation, drainage, and clearance requirements vary by product. Check the exact model’s specifications and manufacturer instructions before ordering or preparing your space.
Use qualified professionals where required. Delivery or optional placement service does not include electrical wiring, plumbing, site preparation, or full installation unless expressly included in your written service scope. Contact us if you need help locating the appropriate product documentation.
